System Description
WARNING: This page is about a different variant/trim than selected.
The ECM uses signals from the vehicle speed sensor to detect the actual gear position (1st, 2nd, 3rd, 4th or 5th gear).
Then the ECM compares the actual gear with the shift schedule in the ECM memory to detect mechanical troubles of the shift solenoid valves and valve body.
DTC DETECTING CONDITION REFERENCE
| DTC No. | DTC Detecting Condition | Trouble Area |
|---|---|---|
| P0796 | The gear required by the ECM does not match the actual gear when driving (2-trip detection logic) |
|