LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Rear Seat Assembly >> Removal

Rear Seat Assembly: Removal

  1. REMOVE SPARE WHEEL COVER  (See REMOVAL )
  2. REMOVE REAR SEAT HEADREST ASSEMBLY LH 
  3. REMOVE REAR SEAT HEADREST ASSEMBLY RH 
  4. REMOVE REAR SEAT CENTER HEADREST ASSEMBLY 
  5. REMOVE REAR SEAT CUSHION ASSEMBLY 
    1. Detach the 2 front hooks of the seat cushion from the vehicle body as shown in the illustration.
      NOTE: Follow the instructions below carefully as the cushion frame deforms easily.
      1. Choose a hook to detach first. Place your hands near the hook as shown in the illustration. Then lift the seat cushion to detach the hook.
      2. Repeat the above procedure for the other hook.
    2. Detach the rear hook of the seat cushion from the seatback.
    3. Remove the rear seat cushion assembly.
    Fig 1: Removing Front Hooks Of Seat Cushion
    G06015133Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE REAR SEATBACK ASSEMBLY LH 
    1. Using a clip remover, remove the 2 rear seat back clips.
    2. Fold the rear seatback assembly LH forward.
      Fig 2: Locating Rear Seat Back Clips
      G06015134Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 bolts and the rear seatback assembly LH.
    Fig 3: Identifying Rear Seatback Assembly LH Bolts
    G06015135Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REAR SEATBACK ASSEMBLY RH 
    1. Using a clip remover, remove the 2 rear seat back clips.
    2. Fold the rear seatback assembly RH forward.
      Fig 4: Locating Rear Seat Back Clips
      G06015136Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 2 bolts and the rear seatback assembly RH.
    Fig 5: Identifying Rear Seatback Assembly RH Bolts
    G06015137Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002