Rear Seat Assembly: Installation

INSTALL REAR SEATBACK ASSEMBLY RH
1. Place the rear seatback assembly RH in the cabin.
  NOTE: Be careful not to damage the vehicle body.
  
  Fig 1: Identifying Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the rear seatback assembly RH with the 2 bolts.
  Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
  
  Fig 2: Identifying Rear Seatback Assembly RH Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 rear seatback clips.
INSTALL REAR SEATBACK ASSEMBLY LH
1. Place the rear seatback assembly LH in the cabin.
  NOTE: Be careful not to damage the vehicle body.
  
  Fig 3: Locating Rear Seat Back Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the rear seatback assembly LH with the 2 bolts.
  Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf)
  
  Fig 4: Identifying Rear Seatback Assembly LH Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
3. Install the 2 rear seatback clips.
Fig 5: Locating Rear Seat Back Clips
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL REAR SEAT CUSHION ASSEMBLY
1. Attach the rear hook of the seat cushion to the seatback.
2. Attach the 2 front hooks of the seat cushion to the vehicle body.
3. Confirm that the seat cushion is firmly installed.
NOTE: When installing the seat cushion, make sure that the seat belt buckle is not under the seat cushion.
INSTALL REAR SEAT CENTER HEADREST ASSEMBLY
INSTALL REAR SEAT HEADREST ASSEMBLY RH
INSTALL REAR SEAT HEADREST ASSEMBLY LH
INSTALL SPARE WHEEL COVER (See INSTALLATION )

Fig 6: Attaching Rear Hook Of Seat Cushion To Seatback
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002