LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Corolla S, 1.8 L, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio/Visual >> Steering Pad Switch >> Removal

Steering Pad Switch: Removal

  1. PRECAUTION 

    (See AIRBAG SYSTEM )

  2. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait at least 90 seconds after disconnecting the cable from the negative (-) battery terminal to disable the SRS system.
  3. REMOVE LOWER NO. 3 STEERING WHEEL COVER  (See REMOVAL )
  4. REMOVE LOWER NO. 2 STEERING WHEEL COVER  (See REMOVAL )
  5. REMOVE STEERING PAD  (See REMOVAL )
  6. REMOVE STEERING PAD SWITCH LH 
    1. Disconnect the pad switch connector from the spiral cable and disengage the clamp.
      Fig 1: Locating Pad Switch Connector With Clamp
      G06010616Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the screw.
    3. Disengage the 2 pins and remove the steering pad switch LH.
    Fig 2: Identifying Steering Pad Switch LH Pins And Screw
    G06010617Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE STEERING PAD SWITCH ASSEMBLY 
    1. Disconnect the pad switch connector from the spiral cable and disengage the clamp.
      Fig 3: Locating Pad Switch Connector With Clamp
      G06010616Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the screw.
    3. Disengage the 2 pins and remove the steering pad switch.
      Fig 4: Identifying Steering Pad Switch Pins
      G06010619Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the clamp.
      Fig 5: Identifying Steering Pad Switch Clamp
      G06010620Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the screw.
    6. Disengage the 2 pins and remove the steering pad switch assembly.