Radio Receiver: Removal
- REMOVE LOWER INSTRUMENT PANEL FINISH PANEL LH
(See
REMOVAL
)
- REMOVE LOWER INSTRUMENT PANEL FINISH PANEL RH
(See
REMOVAL
)
- REMOVE INSTRUMENT PANEL FINISH PANEL END LH
(See
REMOVAL
)
- REMOVE INSTRUMENT PANEL FINISH PANEL END RH
(See
REMOVAL
)
- REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY
(See
REMOVAL
)
- REMOVE RADIO RECEIVER WITH BRACKET
- Remove the 4 bolts.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- Pull the radio receiver with bracket toward the rear of the vehicle and disengage the 4 clips.
- Disconnect each connector and remove the radio receiver with bracket.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE NO. 2 RADIO BRACKET
- Remove the 4 screws and No. 2 radio bracket.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
- REMOVE NO. 1 RADIO BRACKET
- Remove the 4 screws and No. 1 radio bracket.
- REMOVE RADIO RECEIVER ASSEMBLY