LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Base, Automatic >> Repair and Diagnosis >> Suspension >> Rear Suspension >> Suspension (Except Hybrid) >> Rear Shock Absorber >> Disposal

Rear Shock Absorber: Disposal

  1. DISPOSE OF REAR SHOCK ABSORBER 
    1. Fully extend the shock absorber piston rod.
    2. Using a drill, make a hole in the cylinder between A and B as shown in the illustration to discharge the gas inside.
      CAUTION:
      • Be careful when drilling because shards of metal may fly about. Always use the proper safety equipment.
      • The gas is colorless, odorless and non-poisonous.
      Fig 1: Identifying Hole In Cylinder Between A And B
      G04977752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals