Rear No. 2 Suspension Arm: Removal

REMOVE REAR WHEEL
REMOVE REAR NO. 2 SUSPENSION ARM
1. Remove the bolt, and disconnect the rear No. 2 suspension arm (inner side).
  
  Fig 1: Locating Rear No. 2 Suspension Arm (Inner Side)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Remove the bolt, nut and the rear No. 2 suspension arm (outer side) from the rear axle carrier.
  NOTE: When removing the bolt, keep the nut from rotating.
  
  Fig 2: Locating Rear No. 2 Suspension Arm (Outer Side)
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002