LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Base, Automatic >> Repair and Diagnosis >> Restraints >> Passive Restraints >> Seat Belt (Except Hybrid) >> Child Restraint Seat Anchor Bracket >> Installation

Child Restraint Seat Anchor Bracket: Installation

  1. INSTALL CHILD RESTRAINT SEAT ANCHOR BRACKET SUB-ASSEMBLY 
    1. Install the child restraint seat anchor bracket sub-assembly with the 2 nuts.

      Torque: 18 N*m (184 kgf*cm, 13 ft.*lbf) 

      Fig 1: Identifying Child Restraint Seat Anchor Bracket Sub-Assembly Nuts
      G04979840Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL SEPARATE TYPE REAR SEAT BACK ASSEMBLY (for Reclining Seat Type)  (See INSTALLATION )
  3. INSTALL REAR SEAT BACK COVER (for Reclining Seat Type) 
  4. INSTALL SEPARATE TYPE REAR SEAT BACK ASSEMBLY (for Fold Down Seat Type)  (See INSTALLATION )
  5. INSTALL REAR SEAT BACK ASSEMBLY (for Fixed Seat Type)  (See INSTALLATION )
  6. INSTALL REAR CENTER SEAT HEADREST ASSEMBLY (for Fixed Seat Type) 
  7. INSTALL REAR SEAT HEADREST ASSEMBLY 
  8. INSTALL REAR SEAT CUSHION ASSEMBLY  (See INSTALLATION )
scientia non olet · About LEMON Manuals