Clutch Accumulator: Installation

1. Install the clutch accumulator assembly with the 2 nuts.

   Torque: 12 N*m (120 kgf*cm, 9 ft.*lbf) 

   Fig 1: Locating Clutch Accumulator Assembly Nuts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Using SST, connect the clutch lines to the clutch accumulator assembly.

   SST 09023-00101 

   Torque: 15 N*m (155 kgf*cm, 11 ft.*lbf) 

   Fig 2: Connecting Clutch Lines To Clutch Accumulator Assembly Using SST

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the release cylinder heat insulator with the 2 bolts.

   Torque: 12 N*m (120 kgf*cm, 9 ft.*lbf) 

   Fig 3: Locating Release Cylinder Heat Insulator Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Install the clutch accumulator bracket with the 2 bolts.
   Fig 4: Locating Clutch Accumulator Bracket Bolts

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

   Torque: 

   Bolt A 

   12 N*m (120 kgf*cm, 9 ft.*lbf) 

   Bolt B 

   37 N*m (380 kgf*cm, 28 ft.*lbf) 

1. Fill the brake reservoir with brake fluid and bleed the clutch system.

   Torque: 8.4 N*m (86 kgf*cm, 74 in.*lbf) 

HINT:

Check for leakage in the clutch system.