Camshaft Timing Oil Control Valve Assembly: Installation

INSTALL CAMSHAFT TIMING OIL CONTROL VALVE ASSEMBLY
1. Apply a light coat of engine oil to an O-ring of the camshaft timing oil control valve assembly sensor.
  
  Fig 1: Locating Camshaft Timing Oil Control Valve O-Ring
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Install the camshaft timing oil control valve assembly with the bolt.
  Torque: 9.0 N*m (92 kgf*cm, 80 in.*lbf)
3. Connect the camshaft timing oil control valve assembly connector.
  
  Fig 2: Locating Camshaft Timing Oil Control Valve Assembly Connector
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL CLIP NUT
1. Install the clip nut.
  
  Fig 3: Locating Clip Nut
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL VACUUM HOSE CLAMP
1. Install the vacuum hose clamp with the bolt.
  Torque: 5.0 N*m (51 kgf*cm, 44 in.*lbf)
INSTALL NO. 1 ENGINE COVER SUB-ASSEMBLY (See INSTALLATION )