LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Cooling System (Mechanical) >> Engine Cooling System (2AZ-FE) (Except Hybrid) >> Thermostat >> Removal

Engine Cooling System (2AZ-FE) (Except Hybrid): Thermostat: Removal

  1. REMOVE FRONT WHEEL OPENING EXTENSION PAD LH 
  2. REMOVE FRONT WHEEL OPENING EXTENSION PAD RH 
  3. REMOVE ENGINE UNDER COVER LH 
  4. REMOVE ENGINE UNDER COVER RH 
  5. DRAIN ENGINE COOLANT  (See ON-VEHICLE INSPECTION )
  6. DISCONNECT RADIATOR HOSE OUTLET  (See REMOVAL )
  7. REMOVE WATER INLET 
    1. Remove the 2 nuts and disconnect the water inlet from the cylinder block.
      Fig 1: Disconnecting Water Inlet From Cylinder Block
      G04975250Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE THERMOSTAT 
    1. Remove the gasket from the thermostat.
scientia non olet · About LEMON Manuals