LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Base, Automatic >> Repair and Diagnosis >> Electrical >> Horns >> Horn (Except Hybrid) >> Low Pitched Horn >> Removal

Low Pitched Horn: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL (for 2GR-FE)  (See REMOVAL )
  2. REMOVE FRONT BUMPER ASSEMBLY  (See REMOVAL )
  3. REMOVE LOW PITCHED HORN ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the bolt and the low pitched horn assembly.
    Fig 1: Locating Low Pitched Horn Assembly Bolt
    G04981017Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals