High Pitched Horn: Installation

INSTALL HIGH PITCHED HORN ASSEMBLY
1. Install the high pitched horn assembly with the bolt.
  Torque: 20 N*m (204 kgf*cm, 15 ft.*lbf)
2. Connect the connector.
Fig 1: Locating High Pitched Horn Assembly Bolt
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
INSTALL FRONT BUMPER ASSEMBLY (See INSTALLATION )
INSTALL COOL AIR INTAKE DUCT SEAL (for 2GR-FE) (See INSTALLATION )
VEHICLE PREPARATION FOR FOG LIGHT AIM ADJUSTMENT (w/ Fog Light) (See ADJUSTMENT )
PREPARATION FOR FOG LIGHT AIMING (w/ Fog Light) (See ADJUSTMENT )
FOG LIGHT AIMING INSPECTION (w/ Fog Light) (See ADJUSTMENT )
FOG LIGHT AIMING ADJUSTMENT (w/ Fog Light) (See ADJUSTMENT )