LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical (Except Hybrid) >> Stop Light Switch >> Inspection

Stop Light Switch: Inspection

  1. INSPECT STOP LIGHT SWITCH 
    1. Measure the resistance according to the value(s) in the table below.
      Fig 1: Inspecting Stop Light Switch
      G04978446Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      Standard resistance 

    STOP LIGHT SWITCH

    Tester Connection Switch Condition Specified Condition
    1 - 2 Switch pin free Below 1 Ω
    1 - 2 Switch pin pushed In 10 kΩ or higher

    If the measurement result is not normal, replace the stop light switch assembly.

scientia non olet · About LEMON Manuals