Front Brake Flexible Hose: Removal

HINT:

• Use the same procedures for the LH side and RH side.
• The procedures listed below are for the LH side.

1. REMOVE FRONT WHEEL 
2. DRAIN BRAKE FLUID 
3. REMOVE FRONT BRAKE FLEXIBLE HOSE 

1. Remove the clip.
2. Remove the brake tube with SST while holding the front brake flexible hose with a wrench.

   SST 09023-00101 

   Fig 1: Removing Front Brake Flexible Hose

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
   NOTE:

   • Do not bend or damage the brake tube.
   • Do not allow any foreign matter such as dirt and dust to enter the brake tube from the connecting points.
3. Remove the bolt, and separate the front brake flexible hose and the speed sensor from the shock absorber.
4. Remove the union bolt, the front brake flexible hose and gasket.