LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Base, Automatic >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical (Except Hybrid) >> Brake Pedal >> Disassembly

Brake Pedal: Disassembly

  1. REMOVE STOP LIGHT SWITCH ASSEMBLY 
    1. Turn the stop light switch assembly and remove it as shown in the illustration.
      Fig 1: Removing Stop Light Switch
      G04978313Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE STOP LIGHT SWITCH MOUNTING ADJUSTER 
    1. Remove the stop light switch mounting adjuster.
  3. REMOVE BRAKE PEDAL SUB-ASSEMBLY 
    1. Remove the bolt and the nut.
      Fig 2: Locating Brake Pedal Sub-Assembly Bolt And Nut
      G04978314Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 2 brake pedal bushings, the brake pedal shaft collar, and the brake pedal sub-assembly.
  4. REMOVE BRAKE PEDAL PAD 
    1. Remove the brake pedal pad.
scientia non olet · About LEMON Manuals