Rear Spoiler: Installation

INSTALL REAR SPOILER

HINT:

When installing the spoiler, heat the vehicle body and spoiler using a heat light.

Heating temperature

HEATING TEMPERATURE SPECIFICATIONS

Item	Temperature
Vehicle Body	40 to 60°C (104 to 140°F)
Spoiler	20 to 30°C (68 to 86°F)

NOTE: Do not heat the vehicle body and rear spoiler excessively.

Clean the vehicle body surface.
1. Using a heat light, heat the vehicle body surface.
2. Remove the double-sided tape from the vehicle body.
3. Wipe off any tape adhesive residue with cleaner.
Clean the rear spoiler. (If reusing the rear spoiler)
1. Using a heat light, heat the rear spoiler.
2. Remove the double-sided tape from the rear spoiler.
3. Wipe off any tape adhesive residue with cleaner.
4. Apply new double-sided tape to the rear spoiler.
  
  Fig 1: Cleaning Rear Spoiler
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Install the rear spoiler.
1. Using a heat light, heat the vehicle body and rear spoiler.
2. Remove the release paper from the rear spoiler.
  HINT:
  
  After removing the release paper, keep the exposed adhesive free from foreign matter.
3. Engage the 4 clips and install the rear spoiler with the 2 nuts.
  
  Fig 2: Identifying Rear Spoiler Clips And Nuts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002