On-Vehicle Inspection
- INSPECT HOOD SUB-ASSEMBLY
- Check that the clearance measurements of areas A through C are within each standard range.
Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
Standard clearance
HOOD SUB-ASSEMBLYArea Measurement A 2.3 to 5.3 mm (0.091 to 0.209 In.) B 2.0 to 5.0 mm (0.079 to 0.197 in.) C -1.4 to 1.6 mm (-0.055 to 0.063 in.)
- Check that the clearance measurements of areas A through C are within each standard range.