LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Camry Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter (Except Hybrid) >> Steering Pad Switch >> Removal

Steering Pad Switch: Removal

  1. DISCONNECT CABLE FROM NEGATIVE BATTERY TERMINAL 
    CAUTION: Wait for 90 seconds after disconnecting the cable to prevent airbag deployment (See PRECAUTION ).
  2. REMOVE LOWER NO. 3 STEERING WHEEL COVER  (See REMOVAL )
  3. REMOVE LOWER NO. 2 STEERING WHEEL COVER  (See REMOVAL )
  4. REMOVE STEERING PAD  (See REMOVAL )
  5. REMOVE STEERING PAD SWITCH LH (for 4 Spoke) 
    1. Disconnect the pad switch connector from the spiral cable.
    2. Remove the screw.
    3. Disengage the 2 pins and remove the steering pad switch LH.
      Fig 1: Identifying Steering Pad Switch LH - 4 Spoke Model
      G04980572Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE STEERING PAD SWITCH ASSEMBLY (for 4 Spoke) 
    1. Disconnect the pad switch connector from the spiral cable.
    2. Remove the screw.
    3. Disengage the 2 pins and remove the steering pad switch.
      Fig 2: Locating Steering Pad Switch Pins (For 4 Spoke)
      G04980572Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Remove the screw.
    5. Disengage the 2 pins and remove the steering pad switch assembly.
      Fig 3: Locating Steering Pad Switch Assembly Screw And Pins
      G04980574Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE STEERING PAD SWITCH LH (for 3 Spoke) 
    1. Disconnect the pad switch connector from the spiral cable and disengage the clamp.
    2. Remove the screw.
    3. Disengage the 2 pins and remove the steering pad switch LH.
      Fig 4: Locating Steering Pad Switch Screw LH And Pad Switch Connector (For 3 Spoke)
      G04980575Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE STEERING PAD SWITCH ASSEMBLY (for 3 Spoke) 
    1. Disconnect the pad switch connector from the spiral cable.
    2. Disengage the clamp and remove the screw.
    3. Disengage the 2 pins and remove the steering pad switch.
      Fig 5: Locating Steering Pad Switch Assembly Pins And Clamp (For 3 Spoke)
      G04980576Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the clamp and remove the screw.
    5. Disengage the 2 pins and remove the steering pad switch assembly.
    Fig 6: Locating Steering Pad Switch Assembly Pins, Screw And Clamp
    G04980577Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals