Instrument Panel Speaker: Removal

WARNING: This page is about a different car, the 2008 Toyota Avalon. However, it is still accessible from the selected car via links, so may be relevant.

REMOVE NO. 1 SPEAKER HOLE COVER
1. Disengage the 12 claws and remove the No. 1 speaker hole cover.
  
  Fig 1: Identifying Speaker Hole Cover Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE FRONT STEREO COMPONENT SPEAKER
1. Remove the 2 bolts.
  
  Fig 2: Identifying Front Stereo Component Speaker Bolts
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
2. Pull the front stereo component speaker assembly toward you.
3. Disconnect the connector and remove the front stereo component speaker assembly.