Rear Brake Pad, Brake Caliper & Brake Rotor: Installation

Fig 1: Holding Rear Disc Brake Cylinder Assembly

INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY
1. Install the rear disc brake cylinder assembly with the 2 bolts.
  Torque: 27 N*m (275 kgf*cm, 20 ft.*lbf)
CONNECT REAR BRAKE FLEXIBLE HOSE
1. Connect the rear brake flexible hose with the union bolt and a new gasket.
  Torque: 33 N*m (337 kgf*cm, 24 ft.*lbf)
  
  Fig 2: Locating Rear Brake Flexible Hose
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
FILL RESERVOIR WITH BRAKE FLUID (See BLEEDING )
BLEED BRAKE LINE (See BLEEDING )
INSPECT FOR BRAKE FLUID LEAK
INSPECT FLUID LEVEL IN RESERVOIR (See BLEEDING )
INSTALL REAR WHEEL
Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf)