LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Avalon XLS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Pedal >> Disassembly

Brake Pedal: Disassembly

  1. REMOVE STOP LIGHT SWITCH ASSEMBLY 
    1. Turn the stop light switch assembly counterclockwise and remove the stop light switch assembly.
    2. Remove the stop light switch mounting adjuster.
      Fig 1: Removing Stop Light Switch Assembly
      G05001662Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE BRAKE PEDAL SUB-ASSEMBLY 
    1. Remove the nut, bolt, washer and brake pedal sub-assembly from the brake pedal support sub-assembly.
    2. Remove the 2 brake pedal bushes and collar from the brake pedal sub-assembly.
  3. REMOVE BRAKE PEDAL PAD 
    Fig 2: Identifying Brake Pedal Sub-Assembly
    G05001663Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals