LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2009 >> Avalon XLS >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical >> Brake Master Cylinder >> Disassembly

Brake Master Cylinder: Disassembly

  1. REMOVE BRAKE MASTER CYLINDER RESERVOIR FILLER CAP ASSEMBLY 
  2. REMOVE BRAKE MASTER CYLINDER RESERVOIR STRAINER 
  3. REMOVE BRAKE MASTER CYLINDER RESERVOIR ASSEMBLY 
    1. Mount the brake master cylinder sub-assembly in a vise.
      NOTE: Place aluminum plates on the vise to prevent damage to the brake master cylinder sub-assembly.
    2. Using a pin punch and a hammer, tap out the straight pin and remove the brake master cylinder reservoir assembly.
  4. REMOVE MASTER CYLINDER RESERVOIR GROMMET 
    1. Remove the 2 master cylinder reservoir grommets from the brake master cylinder reservoir assembly.
      Fig 1: Tapping Straight Pin
      G05408092Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals