Customize Parameters

HINT:

The following items can be customized.

NOTE:

After confirming whether the items requested by the customer are applicable or not for customization, perform customizing operations.
Be sure to record the current settings before customization.
When troubleshooting, make sure that the item in question is not set to "OFF" as a result of customization (Example: For the symptom "the wireless function does not operate", first check that the wireless function is not set to "OFF", then perform troubleshooting).

CUSTOMIZE

Select the setting by referring to the table below.

Security:

SECURITY SETTING

DISPLAY (ITEM)	DEFAULT	CONTENTS	SETTING
Passive Mode	OFF	For vehicles with the smart key system, PASSIVE MODE is the function that sets the theft deterrent system 30 seconds after the driver's door is closed from the open condition with the key removed from the ignition key cylinder. For vehicles without the smart key system, PASSIVE MODE is the function that sets the theft deterrent system 30 seconds after the driver's door is closed from the open condition with the ignition switch turned from on (IG) to off.	ON/OFF
Warning by Glass Sen	ON	Function that turns the glass break sensor on/off. This function is only effective for vehicles with glass break sensors.	ON/OFF
Entry Delay Time	14s	Function that changes the entry delay time (period before starting the warning) for the passive mode.	0s/14s/30s
Warning by Horn	ON	Function to make the horn warning available.	ON/OFF