Exterior Panels: Mudguard: Removal

1. Remove the clip.
2. Using a T30 "TORX" socket, remove the 4 screws and mudguard.

HINT:

Use the same procedures described for the LH side.

Fig 1: Identifying Front Fender Mudguard With Screws (RH)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the clip.
2. Using a T30 "TORX" socket, remove the 7 screws and mudguard.
   Fig 2: Identifying Rear Quarter Panel Mudguard With Screws (LH)

   Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

1. Remove the clip.
2. Using a T30 "TORX" socket, remove the 8 screws and mudguard.

Fig 3: Identifying Rear Quarter Panel Mudguard With Screws (RH)

Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002