LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio System & Visual System >> Instrument Panel Speaker >> Inspection

Instrument Panel Speaker: Inspection

  1. INSPECT FRONT NO. 2 SPEAKER ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1 -2 Always Below 1 Ω
      3 - 4 Always Below 1 Ω
      2 - 4 Always 2 +/-0.5 Ω
      Fig 1: Identifying Front No. 2 Speaker Assembly Connector Terminal
      G05630205Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the speaker assembly.

  2. INSPECT FRONT NO. 4 SPEAKER ASSEMBLY 
    1. Measure the resistance according to the value(s) in the table below.

      Standard Resistance 

      TESTER CONNECTION SPECIFIED CONDITION CHART

      Tester Connection Condition Specified Condition
      1 - 2 Always 2.0 +/-0.5 Ω

      If the result is not as specified, replace the speaker assembly.

      Fig 2: Identifying Front No. 4 Speaker Assembly Connector Terminal
      G05630198Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals