LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Land Cruiser >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting System (Exterior) >> Lighting System >> Customize Parameters

Customize Parameters

  1. CUSTOMIZING FUNCTION WITH TECHSTREAM 

    HINT:

    The following items can be customized.

    NOTE:
    • When the customer requests a change in a function, first make sure that the function can be customized.
    • Be sure to make a note of the current settings before customizing.
    • When troubleshooting a function, first make sure that the function is set to the default setting.
    1. Connect the Techstream to the DLC3.
    2. Turn the engine switch on (IG).
    3. Turn the Techstream on.
    4. Enter the following menus: Customize Setting.
    5. Select the setting by referring to the table below.

      Light Control 

      LIGHT CONTROL CUSTOMIZE PARAMETERS

      Display Default Contents Setting
      Disp Ex ON Sen NORMAL Changes brightness when lowering lights such as the combination meter indicator light, A/C indicator light, and clock light*2. LIGHT2/LIGHT1/NORMAL/DARK1/DARK2
      Disp Ex OFF Sen NORMAL Changes brightness when canceling lowering lights such as the combination meter indicator light, A/C indicator light, and clock light*3. LIGHT2/LIGHT1/NORMAL/ DARK1/DARK2
      Light Auto OFF Delay 30s Function to continue illuminating the headlights for a certain period of time after closing ail the doors with the engine switch turned from on to off under the condition that the light control switch is at head or AUTO with the headlights ON. OFF/30s/60s/90s
      Sensitivity NORMAL Function to adjust the sensitivity of the lighting illumination*1 LIGHT2/LIGHT1/NORMAL/ DARK1/DARK2
      DRL Function ON DRL Control ON/OFF

      Illuminated Entry 

      ILLUMINATED ENTRY CUSTOMIZE PARAMETERS

      Display Default Contents Setting
      Lighting Time 15s To change the lighting time after closing the door (it will quickly fade out in the case of turning the engine switch on (IG)). 7.5s/15s/30s
      I/L when ACC OFF ON Function to light the interior light when the engine switch is turned from on (IG) to off. ON/OFF
      I/L ON W/Door Key Unlock ON Function to light the interior light, etc. when the door is unlocked with a transmitter, door key or door lock control switch. ON/OFF
      Room Light when Aprchd ON Dome light illumination (when approaching vehicle) ON/OFF

      HINT:

      *1: The sensitivity adjustment may be difficult to confirm. Check by driving the vehicle.

      Fig 1: Lighting Brightness Chart (1 Of 3)
      G05637019Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Fig 2: Lighting Brightness Chart (2 Of 3)
      G05637020Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
      Fig 3: Lighting Brightness Chart (3 Of 3)
      G05637021Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002