LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Drivelines & Axles >> Driveshaft & Universal Joints >> Drive Shaft (Except Hybrid) >> REAR DRIVE SHAFT (for 4WD) >> Inspection

REAR DRIVE SHAFT (for 4WD): Inspection

  1. INSPECT REAR DRIVE SHAFT ASSEMBLY 
    1. Check that there is no remarkable play in the radial direction of the outboard joint.
    2. Check that the inboard joint slides smoothly in the thrust direction.
    3. Check that there is no remarkable play in the radial direction of the inboard joint.
    4. Check the boots for damage.
      5. Fig 1: Checking Rear Drive Shaft Assembly
      G05417158Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals