LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat (Except Hybrid) >> REAR NO. 1 SEAT ASSEMBLY (for RH Side) >> Disassembly

REAR NO. 1 SEAT ASSEMBLY (for RH Side): Disassembly

  1. REMOVE REAR NO. 1 SEAT INNER BELT ASSEMBLY  (See REMOVAL )
  2. REMOVE REAR SEAT RECLINING UPPER COVER 
    1. Using a screwdriver wrapped with protective tape, disengage the 3 claws and remove the rear seat reclining upper cover.
      Fig 1: Disengaging Claws & Removing Rear Seat Reclining Upper Cover
      G05421747Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  3. REMOVE NO. 1 RECLINING ADJUSTER RELEASE HANDLE 
    1. Remove the 3 screws and remove the No. 1 reclining adjuster release handle.
      Fig 2: Identifying No. 1 Reclining Adjuster Release Handle Screws
      G05421748Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  4. REMOVE SEAT ADJUSTER COVER CAP 
    1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the seat adjuster cover cap.
      Fig 3: Disengaging Claws & Removing Seat Adjuster Cover Cap
      G05421749Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  5. REMOVE REAR SEAT CUSHION MOLDING LH 
    1. Remove the 2 screws.
    2. Disengage the 4 claws.
    3. Disengage the guide and remove the rear seat cushion molding LH.
      Fig 4: Identifying Rear Seat Cushion Molding LH With Screws, Claws & Guide
      G05421750Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  6. REMOVE REAR SEAT CUSHION MOLDING RH 
    1. Remove the screw.
    2. Disengage the 5 claws.
    3. Disengage the guide and remove the rear seat cushion molding RH.
      Fig 5: Identifying Rear Seat Cushion Molding RH With Screw, Claws & Guide
      G05421751Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE REAR NO. 1 SEAT CUSHION COVER WITH PAD 
    1. Disengage the hooks.
      Fig 6: Identifying Hooks
      G05421752Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the hooks.
    3. Remove the 2 hog rings.
      Fig 7: Identifying Hog Rings With Hooks
      G05421753Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    4. Disengage the hooks and buttons.
      Fig 8: Identifying Hooks & Buttons
      G05421754Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    5. Remove the 4 hog rings and the rear No. 1 seat cushion cover with pad.
      Fig 9: Identifying Hog Rings On Rear No. 1 Seat Cushion Cover
      G05421755Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE SEPARATE TYPE REAR NO. 1 SEAT CUSHION COVER 
    1. Remove the 11 hog rings and the separate type rear No. 1 seat cushion cover.
      Fig 10: Identifying Hog Rings On Separate Type Rear No. 1 Seat Cushion Cover
      G05421756Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE NO. 1 REAR SEAT ARMREST CAP 
    1. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the No. 1 rear seat armrest cap.
      Fig 11: Disengaging Claws & Removing No. 1 Rear Seat Armrest Cap
      G05421757Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE REAR SEAT ARMREST ASSEMBLY 
    1. Remove the bolt and the rear seat armrest assembly.
      Fig 12: Identifying Rear Seat Armrest Assembly With Bolt
      G05421758Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE TONNEAU COVER HOOK HOLDER 
    1. Remove the 2 screws and the 2 tonneau cover hook holders.
      Fig 13: Identifying Tonneau Cover Hook Holders & Screws
      G05421759Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  12. REMOVE REAR SEATBACK COVER 
    1. Disengage the 4 claws and remove the rear seatback cover.
      Fig 14: Identifying Claws On Rear Seatback Cover
      G05421760Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  13. REMOVE REMOTE CONTROL LEVER KNOB (w/ Rear No. 2 Seat) 
    1. Remove the screw and the remote control knob as shown below.
      Fig 15: Identifying Remote Control Lever Knob Screw
      G05421761Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  14. REMOVE NO. 1 REAR SEAT BEZEL COVER (w/ Rear No. 2 Seat) 
    1. Using a screwdriver wrapped with protective tape, disengage the 4 claws and remove the 2 caps.
      Fig 16: Disengaging Claws & Caps (1 Of 2)
      G05421762Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Using a screwdriver wrapped with protective tape, disengage the 2 claws and remove the cap.
      Fig 17: Disengaging Claws & Cap (2 Of 2)
      G05421763Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Remove the 3 screws and the No. 1 rear seat bezel cover.
      Fig 18: Identifying No. 1 Rear Seat Bezel Cover Screws
      G05421764Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  15. REMOVE REAR SEAT LOCK STRIKER COVER 
    1. Using a screwdriver wrapped with protective tape, disengage the claw.
    2. Disengage the guide and remove the rear seat lock striker cover.
      Fig 19: Identifying Rear Seat Lock Striker Cover
      G05421765Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  16. REMOVE REAR SEAT LOCK CONTROL LEVER SUB-ASSEMBLY 
    1. Remove the 2 screws.
    2. Disengage the guide.
      3. Fig 20: Identifying Rear Seat Lock Control Lever Sub-Assembly With Screws & Guide
      G05421766Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    3. Disconnect the rear seat lock control cable and remove the rear seat lock control lever sub-assembly as shown below.
      Fig 21: Identifying Rear Seat Lock Control Cable & Rear Seat Lock Control Lever Sub-Assembly
      G05421767Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  17. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY (w/o Rear No. 2 Seat) 
    1. Disengage the 20 claws as shown below.
    2. Disengage the 2 clips.
    3. Disengage the 2 guides and remove the rear seatback board carpet assembly.
      4. Fig 22: Identifying Rear Seatback Board Carpet Assembly Claws, Clips & Guides Without Rear No. 2 Seat
      G05421768Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  18. REMOVE REAR SEATBACK BOARD CARPET ASSEMBLY (w/ Rear No. 2 Seat) 
    1. Disengage the 18 claws as shown below.
    2. Disengage the 2 clips.
    3. Disengage the 2 guides and remove the rear seatback board carpet assembly.
      4. Fig 23: Identifying Rear Seatback Board Carpet Assembly Claws, Clips & Guides With Rear No. 2 Seat
      G05421769Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  19. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY LH 
    1. Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly LH.
      Fig 24: Identifying Rear No. 1 Seat Headrest Support Assembly LH Claws
      G05421770Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  20. REMOVE REAR NO. 1 SEAT HEADREST SUPPORT ASSEMBLY RH 
    1. Disengage the 2 claws and remove the rear No. 1 seat headrest support assembly RH.
      Fig 25: Identifying Rear No. 1 Seat Headrest Support Assembly RH Claws
      G05421771Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  21. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD (w/o Rear No. 2 Seat) 
    1. Disengage the hook and the rear No. 1 seatback cover with pad.
      Fig 26: Identifying Hook & Rear No. 1 Seatback Cover With Pad
      G05421772Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  22. REMOVE REAR NO. 1 SEATBACK COVER WITH PAD (w / Rear No. 2 Seat) 
    1. Disengage the hook.
    2. Remove the 2 hog rings and the rear No. 1 seatback cover with pad.
      Fig 27: Identifying Rear No. 1 Seatback Cover Hook With Hog Rings
      G05421773Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  23. REMOVE SEPARATE TYPE REAR NO. 1 SEATBACK COVER 
    1. Remove the 10 hog rings and the separate type rear No. 1 seatback cover.
      Fig 28: Identifying Separate Type Rear No. 1 Seatback Cover With Hog Rings
      G05421774Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  24. REMOVE REAR SEAT RECLINING INNER REAR COVER 
    1. Remove the screw.
    2. Disengage the claw and remove the rear seat reclining inner rear cover.
      Fig 29: Identifying Rear Seat Reclining Inner Rear Cover With Claw
      G05421775Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  25. REMOVE REAR SEAT RECLINING INNER FRONT COVER 
    1. Remove the screw and the rear seat reclining inner front cover.
      Fig 30: Identifying Rear Seat Reclining Inner Front Cover With Screw
      G05421776Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  26. REMOVE REAR SEATBACK INNER COVER 
    1. Remove the 2 screws.
    2. Disengage the claw and remove the rear seatback inner cover.
      Fig 31: Identifying Rear Seatback Inner Cover With Screws & Claw
      G05421777Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  27. REMOVE RECLINING ADJUSTER INSIDE COVER RH 
    1. Disengage the claw.
    2. Disengage the guide and remove the reclining adjuster inside cover RH.
      3. Fig 32: Identifying Reclining Adjuster Inside Cover RH Guide & Claw
      G05421778Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  28. REMOVE NO. 1 REAR SEAT RECLINING COVER 
    1. Remove the screw.
    2. Disengage the 2 guides and remove the No. 1 rear seat reclining cover.
      3. Fig 33: Identifying No. 1 Rear Seat Reclining Cover With Guides & Screws
      G05421779Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  29. REMOVE REAR SEAT RECLINING CONTROL CABLE 
    1. Disengage the claw and remove the rear seat reclining control cable as shown below.
      Fig 34: Identifying Rear Seat Reclining Control Cable & Claw
      G05421780Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals