Outer Rear View Mirror: Installation
- INSTALL OUTER MIRROR COVER (See INSTALLATION )
- INSTALL OUTER MIRROR GLASS (w/o Heater) (See INSTALLATION )
- INSTALL OUTER MIRROR GLASS (w/ Heater) (See INSTALLATION )
- INSTALL OUTER REAR VIEW MIRROR ASSEMBLY WITH COVER
- Engage the claw, and temporarily install the outer rear view mirror assembly with cover.
- Tighten the 3 nuts in the order shown below to install the outer rear view mirror assembly with cover.
Torque: 8.0 N*m (82 kgf*cm, 71 in.*lbf)
- Engage the clamp and connect the connector.
- Install the clip.
- INSTALL FRONT DOOR TRIM BOARD SUB-ASSEMBLY (See REASSEMBLY )
- INSTALL COURTESY LIGHT ASSEMBLY (See REASSEMBLY )
- INSTALL ASSIST GRIP COVER (See REASSEMBLY )
- INSTALL POWER WINDOW REGULATOR MASTER SWITCH ASSEMBLY (See REASSEMBLY )
- INSTALL FRONT ARMREST UPPER BASE PANEL (See REASSEMBLY )
- INSTALL FRONT DOOR INSIDE HANDLE BEZEL PLUG (See REASSEMBLY )
- INSTALL FRONT DOOR LOWER FRAME BRACKET GARNISH (See REASSEMBLY )