LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Power Back Door Warning Buzzer >> Inspection

Power Back Door Warning Buzzer: Inspection

  1. INSPECT POWER BACK DOOR WARNING BUZZER 
    1. Measure the resistance according to the value(s) in the table below.

      HINT:

      When battery voltage is applied directly to the buzzer, the buzzer will not sound.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION TABLE

      Tester Connection Condition Specified Condition
      1-2 Always 950 to 1050 Ω
      Fig 1: Identifying Power Back Door Warning Buzzer
      G05422044Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the wireless door lock buzzer.

scientia non olet · About LEMON Manuals