LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Power Back Door Touch Sensor >> Inspection

Power Back Door Touch Sensor: Inspection

  1. INSPECT POWER BACK DOOR TOUCH SENSOR 
    1. Measure the resistance according to the value(s) in the table below.

      Standard resistance 

      TESTER CONNECTION SPECIFIED CONDITION TABLE

      Tester Connection Condition Specified Condition
      1-2 Not pressed Approx. 1 kΩ
      1-2 Pressed Below 100 Ω
      Fig 1: Identifying Power Back Door Touch Sensor
      G05422048Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

      If the result is not as specified, replace the sensor.

scientia non olet · About LEMON Manuals