Power Back Door System: Precaution
NOTE:
When disconnecting the cable from the negative (-) battery terminal, initialize the following system after the cable is reconnected.
SYSTEM NAME TABLE
| System Name | Information |
|---|---|
| Power Back Door System | INITIALIZATION |
- IGNITION SWITCH EXPRESSIONS
HINT:
The type of ignition switch used on this model differs according to the specifications of the vehicle. The expressions listed in the table below are used in this section.
IGNITION SWITCH EXPRESSIONS TABLE
| Expression | Switch Type | |
|---|---|---|
| Ignition Switch (Position) | Engine Switch (Condition) | |
| Ignition Switch off | LOCK | Off |
| Ignition Switch on (IG) | ON | On (IG) |
| Ignition Switch on (ACC) | ACC | On (ACC) |
| Engine Start | START | Start |