LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Power Back Door System >> Initialization

Power Back Door System: Initialization

  1. RESET BACK DOOR CLOSE POSITION 
    1. When disconnecting the cable from the battery terminal, fully close the back door to turn off the courtesy switch.

      HINT:

      If the back door is closed when disconnecting the cable from the battery terminal, it is not necessary to reset it.

scientia non olet · About LEMON Manuals