LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Power Back Door Opener/Closer Switch >> Removal

Power Back Door Opener/Closer Switch: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH  (See REMOVAL )
  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)  (See REMOVAL )
  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System)  (See REMOVAL )
  5. REMOVE DOOR CONTROL SWITCH 
    1. Disengage the 2 claws and remove the door control switch.
      Fig 1: Identifying Door Control Switch Claws
      G05422321Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002