(Door / Hatch) (Except Hybrid): Hood: Disassembly

REMOVE FRONT HOOD PROTECTOR
1. Disengage the 4 claws and remove the front hood protector.
  
  Fig 1: Identifying Front Hood Protector Claws
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE RADIATOR SEAL SUB-ASSEMBLY
1. Remove the 6 clips.
2. Disengage the 2 clips and remove the radiator seal sub-assembly.
  
  Fig 2: Identifying Radiator Seal Sub-Assembly Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HOOD TO RADIATOR SUPPORT SEAL
1. Remove the 8 clips and hood to radiator support seal.
  
  Fig 3: Identifying Hood To Radiator Support Seal Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE HOOD INSULATOR
1. Using a clip remover, remove the 8 clips and the hood insulator.
  
  Fig 4: Identifying Hood Insulator Clips
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
REMOVE WASHER NOZZLE SUB-ASSEMBLY (See REMOVAL )
DISCONNECT WASHER HOSE ASSEMBLY
1. Disconnect the washer hose assembly.
  
  Fig 5: Identifying Washer Hose Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002