LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Back Door Support >> Removal

Back Door Support: Removal

  1. REMOVE BACK DOOR STAY ASSEMBLY 
    NOTE:
    • Avoid touching the piston rod as much as possible to prevent foreign matter from attaching to it. Be sure to hold the cylinders while servicing.
    • Do not wear cotton gloves or other similar materials when handling the piston rod. Fibers may attach to the rod and result in gas leaks.
    • Do not apply any horizontal load to the door stay in the in order to prevent the piston rod from deforming.
    1. Remove the 4 bolts and back door stay assembly.
      NOTE: Remove the back door stay assembly while supporting the back door by hand.
      Fig 1: Identifying Back Door Stay Assembly Bolts
      G05422351Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals