LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Back Door Support >> Disposal

Back Door Support: Disposal

  1. DISPOSE OF BACK DOOR STAY ASSEMBLY 
    1. Secure the back door stay assembly horizontally in a vise with the piston-rod pulled out.
    2. Wear safety glasses. Use a metal saw to slowly cut a groove between A and B shown below to release the gas.
      NOTE: Although the gas inside the back door stay assembly is colorless, odorless, and harmless, metal debris may scatter. Therefore, cover the back door stay assembly with a piece of cloth or other material.
      Fig 1: Identifying Back Door Stay Assembly Dimension
      G04981636Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals