LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Body & Frame >> Exterior Body Panels >> (Door / Hatch) (Except Hybrid) >> Back Door Closer System >> DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Read the DTCs by following the directions on the tester screen.

      HINT:

      Refer to the Techstream operator's manual for further details.

  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Erase the DTCs by following the directions on the tester screen.

      HINT:

      Refer to the Techstream operator's manual for further details.

scientia non olet · About LEMON Manuals