LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Infotainment >> Audio System & Visual System (Except Hybrid) >> Radio Receiver >> Removal

Radio Receiver: Removal

  1. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System)  (See REMOVAL )
  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System)  (See REMOVAL )
  4. REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)  (See REMOVAL )
  5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)  (See REMOVAL )
  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET 
    1. Remove the 4 bolts.
      Fig 1: Identifying Radio Receiver Assembly With Bracket Bolts
      G05420557Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Pull the radio receiver assembly with bracket toward the rear of the vehicle and disengage the 4 clips.
    3. Disconnect each connector and remove the radio receiver assembly with bracket.
      Fig 2: Identifying Radio Receiver Assembly With Bracket Clips
      G05420558Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  7. REMOVE NO. 1 RADIO BRACKET (w/o Multi-information Display) 
    1. Disengage the claw and remove the connector.
      Fig 3: Identifying No. 1 Radio Bracket Connector (Without Multi-Information Display)
      G05420559Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 4 screws and No. 1 radio bracket.
      Fig 4: Identifying No. 1 Radio Bracket Screws (Without Multi-Information Display)
      G05420560Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  8. REMOVE NO. 1 RADIO BRACKET (w/ Multi-information Display) 
    1. Disengage the claw and remove the connector.
      Fig 5: Identifying No. 1 Radio Bracket Connector (With Multi-Information Display)
      G05420561Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the 5 screws and No. 1 radio bracket.
      Fig 6: Identifying No. 1 Radio Bracket Screws (With Multi-Information Display)
      G05420562Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE NO. 2 RADIO BRACKET (w/o Multi-information Display) 
    1. Remove the 4 screws and No. 2 radio bracket.
      Fig 7: Identifying No. 2 Radio Bracket Screws (Without Multi-Information Display)
      G05420563Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  10. REMOVE NO. 2 RADIO BRACKET (w/ Multi-information Display) 
    1. Remove the 5 screws and No. 2 radio bracket.
      Fig 8: Identifying No. 2 Radio Bracket Screws (With Multi-Information Display)
      G05420564Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  11. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY  (See REMOVAL )
  12. REMOVE RADIO RECEIVER ASSEMBLY 
scientia non olet · About LEMON Manuals