LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Horns >> Horn (Except Hybrid) >> Low Pitched Horn >> Removal

Low Pitched Horn: Removal

  1. REMOVE COOL AIR INTAKE DUCT SEAL  (See REMOVAL )
  2. REMOVE LOW PITCHED HORN ASSEMBLY 
    1. Disconnect the connector.
    2. Remove the bolt and the low pitched horn assembly.
      Fig 1: Identifying Low Pitched Horn Bolt & Connector
      G05420995Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals