LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Stop Light Switch >> Removal

Stop Light Switch: Removal

  1. REMOVE FRONT DOOR SCUFF PLATE LH  (See REMOVAL )
  2. REMOVE COWL SIDE TRIM SUB-ASSEMBLY LH  (See REMOVAL )
  3. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)  (See REMOVAL )
  4. REMOVE LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System)  (See REMOVAL )
  5. REMOVE STOP LIGHT SWITCH ASSEMBLY 
    1. Disconnect the connector.
      Fig 1: Identifying Stop Light Switch Assembly Connector
      G05419893Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Loosen the stop light switch lock nut and remove the stop light switch assembly.
      Fig 2: Identifying Stop Light Switch Lock Nut
      G05419894Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
scientia non olet · About LEMON Manuals