LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt (Except Hybrid) >> Front Passenger Seat Belt Warning Light >> Removal

Front Passenger Seat Belt Warning Light: Removal

  1. REMOVE CENTER INSTRUMENT PANEL REGISTER ASSEMBLY  (See REMOVAL )
  2. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/o Smart Key System)  (See REMOVAL )
  3. REMOVE CENTER INSTRUMENT CLUSTER FINISH PANEL ASSEMBLY (w/ Smart Key System)  (See REMOVAL )
  4. REMOVE HEATER CONTROL AND ACCESSORY ASSEMBLY (for Manual Air Conditioning System)  (See REMOVAL )
  5. REMOVE AIR CONDITIONING CONTROL ASSEMBLY (for Automatic Air Conditioning System)  (See REMOVAL )
  6. REMOVE RADIO RECEIVER ASSEMBLY WITH BRACKET (w/o Navigation System)  (See REMOVAL )
  7. REMOVE NAVIGATION RECEIVER ASSEMBLY WITH BRACKET (w/ Navigation System)  (See REMOVAL )
  8. REMOVE INTEGRATION CONTROL AND PANEL ASSEMBLY (w/o Navigation System) 
    1. Disengage the claw and disconnect the connector.
      Fig 1: Identifying Claw
      G05419395Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Disengage the 2 clips and remove the integration control and panel assembly.
      Fig 2: Identifying Integration Control & Panel Assembly Clips
      G05419396Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  9. REMOVE NO. 1 RADIO BRACKET (w/ Navigation System)  (See REMOVAL )
  10. REMOVE NO. 2 RADIO BRACKET (w/ Navigation System)  (See REMOVAL )
  11. REMOVE NAVIGATION RECEIVER ASSEMBLY (w/ Navigation System) 
scientia non olet · About LEMON Manuals