Rear Brake Pad, Brake Caliper & Brake Rotor: Installation

INSTALL REAR DISC BRAKE CYLINDER ASSEMBLY
1. Install the rear disc brake cylinder assembly to the rear disc brake cylinder mounting with the 2 bolts.
  Torque: 34 N*m (347 kgf*cm, 25 ft.*lbf)
  
  Fig 1: Identifying Rear Disc Brake Cylinder Assembly
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
CONNECT REAR FLEXIBLE HOSE
1. Connect the rear flexible hose to the rear disc brake cylinder assembly with the union bolt and a new gasket.
  Torque: 33 N*m (336 kgf*cm, 24 ft.*lbf)
  
  Fig 2: Identifying Rear Flexible Hose Union Bolt
  Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
FILL BRAKE FLUID RESERVOIR (See ON-VEHICLE INSPECTION )
BLEED BRAKE LINE (See ON-VEHICLE INSPECTION )
BLEED BRAKE ACTUATOR (See ON-VEHICLE INSPECTION )
INSPECT FLUID LEVEL (See ON-VEHICLE INSPECTION )
INSPECT FOR BRAKE FLUID LEAK
ADJUST PARKING BRAKE SHOE CLEARANCE AND PARKING BRAKE PEDAL TRAVEL (See ADJUSTMENT )
INSTALL REAR WHEEL
Torque: 103 N*m (1050 kgf*cm, 76 ft.*lbf)