LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Brakes >> Mechanical - Hydraulic >> Brakes - Mechanical (Except Hybrid) >> Brake Pedal >> Disassembly

Brake Pedal: Disassembly

  1. REMOVE BRAKE PEDAL SUB-ASSEMBLY 
    1. Disengage the 2 clamps.
      Fig 1: Identifying Brake Pedal Clamps
      G05417902Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
    2. Remove the bolt, nut and brake pedal sub-assembly from the brake pedal support sub-assembly.
      Fig 2: Identifying Brake Pedal Bolt & Nut
      G05417903Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. REMOVE BRAKE PEDAL SHAFT COLLAR 
    1. Remove the brake pedal shaft collar from the brake pedal sub-assembly.
  3. REMOVE BRAKE PEDAL BUSHING 
    1. Remove the 2 brake pedal bushings from the brake pedal sub-assembly.
  4. REMOVE BRAKE PEDAL PAD 
    1. Remove the brake pedal pad from the brake pedal sub-assembly.
scientia non olet · About LEMON Manuals