DTC U0100: Lost Communication with ECM/PCM "A": Description

The combination meter assembly communicates with the ECM via the CAN communication lines (CAN No. 1 Bus).

DTC DETECTION CONDITION TABLE

DTC No.	DTC Detection Condition	Trouble Area
U0100	When either of following conditions detected Vehicle speed 5 km/h (3 1 mph) or more and IG voltage 10.5 V or more No communication with ECM continues for 3 seconds or more (No communication to ECM and skid control ECU continues for 60 seconds or more)	CAN communication system ECM