LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Gauges & Instrument Panels >> Meter (Except Hybrid) >> Light Control Rheostat >> Installation

Light Control Rheostat: Installation

  1. INSTALL LIGHT CONTROL RHEOSTAT 
    1. Engage the 2 claws and install the light control rheostat.
      Fig 1: Identifying Light Control Rheostat Claws
      G05420427Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002
  2. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Manual Air Conditioning System)  (See INSTALLATION )
  3. INSTALL LOWER INSTRUMENT PANEL FINISH PANEL SUB-ASSEMBLY (for Automatic Air Conditioning System)  (See INSTALLATION )
  4. INSTALL COWL SIDE TRIM SUB-ASSEMBLY LH  (See INSTALLATION )
  5. INSTALL FRONT DOOR SCUFF PLAT