LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Lighting System >> DTC Check/Clear

DTC Check/Clear

  1. CHECK DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn Techstream on.
    4. Select the following menu items: Body Electrical / Trouble Codes.
    5. Read the DTCs.

      HINT:

      Refer to the Techstream operator's manual for further details.

  2. CLEAR DTC 
    1. Connect Techstream to the DLC3.
    2. Turn the ignition switch on (IG).
    3. Turn Techstream on.
    4. Select the following menu items: Body Electrical / Trouble Codes.
    5. Erase the DTCs.

      HINT:

      Refer to the Techstream operator's manual for further details.

scientia non olet · About LEMON Manuals