LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> Highlander Base, AWD >> Repair and Diagnosis >> Accessories & Equipment >> Exterior Lights >> Lighting (Except Hybrid) >> Lighting System >> Customize Parameters

Customize Parameters

HINT:

The following items can be customized.

NOTE:
  • Before attempting to customize vehicle settings, confirm whether it is possible to make the change that the customer has requested.
  • Be sure to record the current value before customizing.
  • Before troubleshooting the lighting system, pay attention because there is a possibility that a function has been disabled by customizing. (Example: If "The wireless operation does not function", check that the wireless operation has not been disabled by customizing, then perform the troubleshooting.)

Illuminated Entry: 

ILLUMINATED ENTRY AND DATA LIST TABLE

Display Default Contents Setting
Lighting Time 15 s Changes the lighting time of the personal light, interior lights and ignition key cylinder light*1 /engine switch illumination*2 after closing all of the doors (It will quickly fade out when the ignition switch is turned on (IG)) 7.5 s / 15 s / 30 s
I/L when ACC OFF ON Lights up the personal light, interior lights and ignition key cylinder light*1 /engine switch illumination*2 when the ignition switch is turned from on (ACC or IG) to off ON/OFF
I/L ON W/Door Key Unlock ON Lights up the personal light, interior lights and ignition key cylinder light*1 /engine switch illumination*2 when the doors are unlocked using the mechanical key. ON / OFF
Mirr-Foot-Lgt Approached ON Lights up the door mirror foot lights when the key enters actuation area around the doors ON / OFF
Mirr-Foot-Lgt Unlocked ON Lights up the door mirror foot lights when the doors are unlocked using door control transmitter or mechanical key ON/OFF
Mirr-Foot-Lgt w/Master SW ON Lights up the door mirror foot lights when the doors are unlocked with the door control switch ON / OFF
Mirror Foot Light Time 15 s Changes the lighting time of the door mirror foot lights. 0 s / 7.5 s / 15 s / 30 s
HINT:
  • *1: w/o Smart Key System
  • *2: w/ Smart Key System

Light Control: 

LIGHT CONTROL AND DATA LIST TABLE

Display Default Contents Setting
Disp Ex ON Sen Normal Changes the ambient brightness level required to dim the lights such as the indicator lights of the combination meter, A/C indicator light, and clock Light2 / Light1 / Normal / Dark1 / Dark2
Disp Ex OFF Sen Normal Changes the ambient brightness level required to cancel the dimming of the combination meter indicator lights, A/C indicator light, and clock Light2 / Light1 / Normal / Dark1 / Dark2
Light Auto OFF Delay 30 s Keeps the headlights on for a certain period of time after turning the ignition switch off and closing all the doors with the headlights on OFF / 30 s / 60 s / 90 s
Sensitivity Normal Adjusts the sensitivity of the automatic light control function Light2 / Light1 / Normal / Dark1 / Dark2
DRL Function ON ON / OFF of the DRL function. ON / OFF