LEMON Manuals: Even more car manuals for everyone
Home >> Toyota >> 2008 >> FJ Cruiser RWD >> Repair and Diagnosis >> Restraints >> Seat Belts >> Seat Belt >> Front Seat Inner Belt Assembly >> Inspection

Front Seat Inner Belt Assembly: Inspection

  1. INSPECT FRONT SEAT INNER BELT ASSEMBLY (for Driver Side) 
    1. Check the resistance.
      1. Using an ohmmeter, measure the resistance between the terminals.

        Standard resistance 

        STANDARD RESISTANCE

        Tester Connection Condition Specified Condition
        10 - 11 Tongue plate fastened Below 1 Ω
        Tongue plate released 10 kΩ or higher
        Fig 1: Identifying Front Seat Inner Belt Assembly (For Driver Side)
        G05113380Courtesy of © TOYOTA, LICENSE AGREEMENT TMS1002

        If the result is not as specified, replace the front seat inner belt.

scientia non olet · About LEMON Manuals